If you have a Cisco router and want to check if the VPN is enabled, you can follow these steps:
1. Log into your Cisco router’s web interface.
2. Click on the “Status” tab.
3. Under the “General” section, look for the “VPN Status” field. If it says “Enabled”, then your VPN is up and running.
When you need to check the status of your Cisco tunnel, there are a few different commands you can use. The “show crypto isakmp sa” command will give you information on the current IKE SA status, while the “show crypto ipsec sa” command will provide information on the current IPSec SAs. If you want to see detailed debugging information for your tunnel, you can use the “debug crypto isakmp” and “debug crypto ipsec” commands.
Assuming you would like a blog post on how to check the status of a VPN on an iPhone:
It is easy to check the status of your VPN on your iPhone. Simply open the Settings app and go to “General.” From there, choose “VPN” and locate the VPN you are connected to. Tap on the “(i)” button to find “Connect Time” and see the active connection length to the current VPN session.
If you want to check whether your VPN is working, you can do so by visiting a site that will show you your IP address. With your VPN turned off, head to a website that will show you your IP address. Once you have your IP address, turn on your VPN and connect to a server. Your IP address should now change to one of the VPN provider’s. Compare your new IP address with your old one to see if your VPN is working.
Thank your for reading!