How do I configure my router for ExpressVPN?

If you want to use ExpressVPN on your router, you will need to set it up manually. Below we will show you how to do this on both DD-WRT and Tomato routers.

First, log in to your router control panel. If you’re not sure how to do this, check your router’s documentation or contact your ISP.

Next, open the VPN tab (1) and click on the “Add a profile” button (2).

Enter the following information:

Profile Name: ExpressVPN
Server Address: Enter aExpressVPN server address here. You can find these in the “server list” section of your account dashboard.
Transmission Protocol: Select UDP
Authentication Type: SelectStatic Key
Static Key: Copy and paste the shared key from your account dashboard here

Click “Save/Apply” (3) when you are finished. Your router is now configured for ExpressVPN!

If you’re running ExpressVPN on your router, there are a few different ways to disconnect.

One way is to simply reboot your router. This will cause the ExpressVPN connection to be dropped and you’ll be able to surf the web without VPN protection.

Another way is to log into your router’s administration panel and find the section for VPN connections. From here, you should be able to disable the ExpressVPN connection or even remove it entirely.

Once you’ve disconnected from ExpressVPN, you’ll be able to browse the internet as usual without any restrictions. You can always reconnect at any time by following the same steps that you used to originally set up the connection.

Worth knowing

If you’re looking to enable ExpressVPN on your router, the first step is to download the ExpressVPN firmware. You can find this firmware on the ExpressVPN website.

Once you have the firmware downloaded, you’ll need to connect your Linksys router to the internet. After the router is connected, you can go ahead and install the ExpressVPN firmware.

After the firmware is installed, you’ll need to connect to the router running ExpressVPN. Once you’re connected, you can complete the setup on the router.

Worth knowing

If you have an ExpressVPN router at home and want to be able to access it remotely, there are a few things you’ll need to do. First, make sure your router is connected to the internet and that remote access is enabled in the router’s settings. Next, open the ExpressVPN app and log in with your account credentials. Then, select “Settings” from the main menu and scroll down to the “Remote Access” section. Here, you’ll enter the IP address or domain name of your router into the “Router Address” field and click “Connect”. Once connected, you should be able to manage your router’s settings and VPN connection just as if you were at home.

Worth knowing

To access your ExpressVPN router dashboard, you will need to enter your router admin password. You can find the default router admin password next to the “Password” field on the bottom of your Netgear router. If you need any assistance, you can contact the ExpressVPN Support Team for help.

Thank your for reading!