How do I turn my Mac into a VPN server?

If you need to set up a VPN server on your Mac, there are a few steps you’ll need to follow. First, you’ll need to enable the “VPN Server” feature in your Mac’s System Preferences. To do this, open System Preferences and click on the “Network” icon. Then, select the “VPN Server” option in the list of options on the left side of the window.

Once you’ve enabled the VPN Server feature, you’ll need to choose a protocol for your server. The most common protocols are PPTP and L2TP/IPSec. To choose a protocol, click on the “Advanced” button in the VPN Server window. Then, select the protocol you want to use from the drop-down menu next to “Configure.”

After you’ve chosen a protocol, you’ll need to configure your server settings. To do this, click on the “Settings” button in the VPN Server window. In this section, you’ll be able to specify which ports will be used for incoming connections, as well as what IP address range will be used for outgoing connections. You can also specify whether or not clients will be able to access shared folders on your Mac while they’re connected to your VPN server.

Once you’ve finished configuring your settings, click on the “OK” button at the bottom ofthe window. Then, click onthe “Apply”button at th ebottom right corner o fthe System Preferenceswindow . Your server is now ready touse!

If you’re looking to add an extra layer of security to your home network, or if you want to be able to access your home network from anywhere in the world, you can do so by turning your computer into a VPN server. By doing this, you’ll be able to create a VPN profile which will allow you to select the Start button, then select Settings > Network & Internet > VPN > Add a VPN connection.

In Add a VPN connection, you’ll need to do the following:

-Select the VPN type.
-Enter a Profile name. This is the name of the VPN connection.
-Select the VPN server you want to connect to.
-If you want to connect to a VPN server that requires authentication, select The VPN server requires authentication. Then, enter your User name and Password.
-Select Save.

After you’ve completed these steps, you’ll be able to access your home network from anywhere in the world, as long as you have an internet connection.

Worth knowing

If you want to be able to access your Mac computer remotely, or want to connect to a network not commonly accessible outside of your home or office, you can do so by setting up and hosting a VPN server directly on your Mac. This tutorial will show you how to set up a VPN server on macOS High Sierra 10.13.

First, open the “System Preferences” application from the  Apple menu and click on the “Network” icon. Then select the “+” button in the lower left-hand corner and choose “VPN” for the interface type. Choose “L2TP over IPsec” for the VPN Type and give your service a name like “Mac mini VPN.” Be sure that the “Configuration:” drop-down menu is set to “” before clicking “Create.”

Next, open the newly created VPN connection and enter your server’s public IP address or hostname under both the “Server Address:” and “Account Name:” fields. Leave all other fields blank and click “Authentication Settings” In the ensuing sheet, check off both boxes next to “Shared Secret” so that secret appears in both text boxes below it. Create a shared secret by entering any phrase here—just make sure it is something only you and authorized users know!

Back on the main Network window, click on “+” again and select either Wi-Fi or Ethernet (depending on how your Mac is connected to the internet) from the interface list. Give this new service a unique name like “Mac mini VPN Client” so it’s easy to remember which one is which later. Click ‘Create’ once more.
Now go back into System Preferences > Network > Advanced For both configurations (VPN Server & Client), click on their corresponding TCP/IP tabs then click ‘Configure IPv6:’ drop-down menus and select ‘Off.’ Returning to eachService’sGeneral tab, check off respective ‘Send All Traffic Over VPN Connection’ boxes before clicking OK at bottom right of window; now close out of System Preferences altogether

Worth knowing

There are a couple of different ways that you can find VPN on your Mac. The first way is to go into your System Preferences and then click on the Network icon. From there, you will see a list of all the different network connections that your Mac has. If you see VPN listed under the connection type, then it means that your Mac does have VPN support.

The second way to find out if your Mac has VPN support is to look for a program called Tunnelblick. This program is specifically designed for using VPNs on Macs and it should be available for free from the App Store. If you install this program, it will put an icon in your menu bar which will make it easy for you to access your VPN whenever you need it.

Worth knowing

If you’re not already familiar with Hola, it’s a free VPN service that allows you to browse the internet without restrictions. While it’s a great service, there may come a time when you want to uninstall it from your Mac. Here’s how to do it:

First, open up Finder and head to the Applications folder. Find the Hola icon and drag it into the trash. You may be prompted for your password before the process can complete – enter it and hit OK.

Next, open up System Preferences and click on “Profiles.” Select the profile labeled “com.hola” and click on the minus sign at the bottom of the window to delete it.

That’s all there is to uninstalling Hola from your Mac!

Thank your for reading!